Update: tried building a raised garden bed out of free pallet wood and it went bad fast
I grabbed 6 pallets from behind a hardware store off Grand Ave last month thinking I scored free lumber for a raised bed out back. After cutting and sanding for about 3 evenings, I had a 4x8 frame put together and felt pretty good about it. Then two boards near the bottom started to bend and split once I filled it with dirt, and the left side pulled apart from the corner. Turns out some of those pallets were the thin flimsy kind and I never checked the stamps on them, plus I skipped bracing the corners. A guy on my route who builds decks told me I should have looked for the HT mark and added corner blocks from the start. So now I have half a bed dumping soil on the patio and I'm deciding whether to fix it or just go buy real lumber. Has anyone had luck reinforcing a pallet bed after it starts to bow, or is it better to just tear it down and start over?
Man, that "dumping soil on the patio" line hit close to home, been there with a project I thought was gonna be easy. Honestly once pallet wood starts bowing and splitting like that, patching it usually just buys you a couple weeks before it goes again. Sorry it went sideways on you, that's a rough way to spend three evenings.