I thought brake lathes were a waste of money until I saw the difference on a 2016 F-150
I used to just slap new pads on whenever a customer came in with pulsating brakes, and I'd tell them the rotors were "within spec." Then last month a guy brought his 2016 F-150 back three times for the same shaking, and my boss finally made me put the rotors on our old Ammco lathe. The before and after was night and day: runout went from .008" to .002" and the pedal felt smooth as glass on the test drive. That truck had 87k miles and the rotors had plenty of meat left, so I was just burning time and comeback labor by skipping the cut. Now I'm second-guessing how many brake jobs I've done half-right, and I'm curious if you all cut rotors as a rule or just when they're warped.