Rant: I sanded 320 before 180 on a Tacoma bed and learned my lesson fast
I had a 2016 Tacoma bed side to prep for paint, and I got lazy and jumped straight to 320 grit instead of starting with 180 like I normally do. The sealer would not bite right and I ended up with sand scratches showing through the base coat, so I had to block the whole panel back down to bare metal and start over, burned about 4 extra hours on a job I quoted at 6. My old boss at the shop in Reno always said coarse first, then work your way up, and I thought I knew better. What grit do you guys start with on factory paint that you are not stripping all the way down?
Honestly 320 on factory paint is fine, you just have to actually scuff it enough and not baby it. The sealer not biting is usually a cleaning or wipe down problem, not the grit, and 180 just puts deeper scratches in your base that you have to chase anyway. Going coarse first is old school thinking from when paints were way softer.