I finally found why a dryer kept tripping the breaker: a screw pinched the harness behind the drum
Last Tuesday I was in a rental unit in Akron, second visit on a dryer that popped the breaker about 10 minutes into every cycle. First trip I blamed the outlet and swapped it, felt dumb when the guy called back two days later. Second time I pulled the drum and found a sheet metal screw from the lint chute sitting right on the wire harness, insulation worn through to bare copper. I taped the bundle, rerouted it an inch away from the frame, replaced the screw with a shorter one, and ran three full cycles with no trip. Cost the customer my first visit free, since I missed it, but he's already sent me two neighbors. What odd stuff have you all found hiding behind a drum that had nothing to do with the heating circuit?